Top
Top
Top
Top
Top
Feeding
9 - 36 V
Battery
1000 mAh
Interfaces
Analog In
2x Digital In
Digital Out
BLE 4.0
GNSS
GPS
GLONASS
Galileo
BDS
SBAS
BI 420 TREK
4G GPS tracker for basic monitoring that provides accurate tracking, monitors ECO driving parameters and works with BLE sensors. An ideal solution for basic monitoring of passenger vehicles.
Features
Key features
BI 420 TREK is a tracker for basic monitoring with 4G LTE support and a built-in 1000 mAh battery. The device is designed to solve basic transport monitoring tasks and additionally allows you to connect various BLE sensors, monitor the ignition status and control the engine blocking relay. Monitoring of ECO driving parameters allows you to analyze driving style and helps improve road safety.
Main features
- High accuracy of determination of coordinates and mileage
- Connection of various sensors via BLE
- The possibility of connecting to a cigarette lighter (when using an additional cable)
- ECO-driving control (sharp acceleration, braking)
- “Black box” mode with backup memory
- FOTA — updating firmware and changing settings online (including scanning BLE sensors)
Applying
// This model is ideal for
Passenger vehicle monitoring
Hired vehicle monitoring
Taxi services; courier delivery services
Characteristics
Transmission standard
LTE, GSM
Frequency ranges
- LTE: B1/B3/B5/B7/B8/B20
- GSM: 850/900/1800/1900 MHz
- GSM: 850/900/1800/1900 MHz
Transmitter power
- GSM850/EGSM900: 33 dBm
- DCS1800/PCS1900: 30 dBm
- LTE-FDD: 23 dBm
- DCS1800/PCS1900: 30 dBm
- LTE-FDD: 23 dBm
Automatic range selection
GPRS class – 12
LTE category
Cat.1
Navigation system type
GPS, GLONASS, Galileo, BDS, SBAS
Number of simultaneously operating navigation systems
3
Power supply type and voltage
constant, 9 - 36 V
Average current consumption (12 V)
60 mA
Inputs/Outputs
1 discrete input (active "plus")
1 discrete input (active "minus")
1 analog input 1 discrete output
1 discrete input (active "minus")
1 analog input 1 discrete output
Discrete input voltage range
from 0 to 40 V
Discrete output type
open collector
Maximum load current of the discrete output
0.5 A
Analog input voltage range
0 – 36 V
Wireless interfaces
BLE 4.0
Built-in battery
1000 mAh
GSM and GPS antenna design
internal
Motion sensor
accelerometer
Number of SIM cards
1
Black box
2 MB (or 90,000 records)
Maximum pulse signal frequency
500 Hz
Operating temperature
from -30 ° C to +80 ° C
Relative humidity
5 - 95% without condensation
Overall dimensions
93 x 60 x 25 mm
Net weight
120 g
Protocols and Integration (For Developers)
-
Supported data transfer protocolsWialon IPS
-
ConfigurationSMS commands, GPRS, FOTA
-
Full compatibility withWialon, Navixy, Cropio, GPS-Trace and other platforms
// FAQ
Questions and answers
Can I connect a fuel level sensor to the tracker?
Yes, but the tracker will only work with wireless BLE sensors. Before installing such a kit, you need to make sure that a sufficient RSSI level will be provided in real operating conditions.
Is there NTP support?
Yes, so in the absence of a GPS signal, the tracker will always transmit the correct date and time (important for gas stations and filling stations, where there is often no possibility of receiving a GPS signal).
Is it possible to remotely configure BLE?
Yes, it is possible – using FOTA, it is possible to remotely scan and configure BLE sensors as if the tracker was connected directly to your PC.
